I used the OEM(factory) replacement from local autozone.
Just tell them the Year, make, and model of your car
1.) Open hoop to get to serpentine belt.
Just tell them the Year, make, and model of your car
1.) Open hoop to get to serpentine belt.
2. Locate tension pulley, Then use your serpentine belt tool or wrench and long tube to relieve tension on belt
-14mm or 9/16 socket was used on tensioner bolt
-14mm or 9/16 socket was used on tensioner bolt
3. Turn it Clockwise(towards front of car) to relieve tension. As belt loosen pull it off the pulley once belt is off pulley SLOWLY LET TENSION PULLEY RETURN TO ITS START POSITION.
4. Completely remove old worn belt
5. Now you can install new belt. Even car is difference so check you owner's manual or GTS(goggle That S**t) for the correct for path of belt around each pulleys (crank shaft, Power Steering, A/C compressor, Alternator, and tensioner)
6. Before Starting car up do a visual inspection to insure belt is aligned and fully seated on all pulleys.